Air Motion

Three-way bi-amped sculpted loudspeaker array


Key Features

  • Visually striking appearance for style-led environments
  • Exceptionally balanced waveform transmission
  • Fibreglass Kevlar composite construction
  • Standard red finish, optional custom colours
  • Integrated flying and mounting system
  • Optional floor stand or flying bracket
  • Internal electronic control prevents overdriving

OverView

The revolutionary three-way bi-amped Air Motion sculpted loudspeaker array sets an entirely new standard in audio aesthetics. Never before has so much style and performance been brought together in perfect harmony.

Air Motion comprises three transducers – a 12" low frequency driver, an 8" mid frequency driver, and a 1.5" high frequency compression driver – each loaded by an isometric conical horn and housed in a skeletonised format free from restricting and potentially resonant enclosures. Air Motion harnesses the excellent inherent sound quality of the conical horn, whose propagation is based on the spheroid section and allows for solid radiation angles. The benefits are twofold: tight beamwidth control is maintained over the 50° horizontal by 60° vertical dispersion pattern, giving higher output and more defined sound quality due to a decrease in early reflections; and constant directivity is achieved across the horn's entire dispersion, allowing for an exceptionally balanced waveform transmission.

Air Motion will normally be deployed either using a proprietary integral flying and mounting system, or by means of an optional floor or subwoofer mounted ground support system, forming a completely stable and correctly angled audio point source. The Fibreglass Kevlar composite structure is finished in Void red, although as with other Air Series enclosures Air Motion is available in a wide range of custom colours to match specific décor demands. A single Neutrik speakON™ 4-pole NL4 connector is provided.

Specifications

  • Frequency Response: 140Hz - 20kHz ±3dB
  • Efficiency: LF: 106dB 1w/1m, HMF: 108dB 1w/1m
  • Crossover Point: 140Hz and 600Hz, HMF: 600Hz - Passive 1.7kHz
  • Impedance: LF: 8 ohms, HMF: 8 ohms
  • Power Handling: LF: 500 Watts RMS, HMF: 250 Watts RMS
  • Maximum Output: 134dB cont, 138dB peak
  • Driver Configuration: 1 x 12" LF, 1 x 8" MF, 1 x 1.5" HF compression driver
  • Dispersion: 60°H x 50°V
  • Protection: Internal Electronic Control
  • Connectors: 2 x 4-pole speakON™ NL4
  • Height: 600mm (23.6")
  • Width: 850mm (33.5")
  • Depth: 760mm (29.9")
  • Weight: 35.4kg (77.9lbs)
  • Enclosure: Fibreglass Kevlar composite
  • Rigging: Integral mounting system
  • Colour: Custom colours available

Document Downloads

The following documents / drawings are available for download